Touch dimmer Standard LED
You can switch and dim your lighting with the touch dimmer Standard LED. As an LED dimmer, the dimmer specifically sets itself automatically to leading edge or trailing edge phase control. The dimmer is implemented as a 2-wire / 3-wire device and is supplied with 230 V mains voltage.
Therefore, operation without neutral conductor is also possible. Using the mode selector push-button with LED indication, you can conveniently configure the dimmer. The touch dimmer Standard can be installed in a commercially available wall box (e.g. Kaiser 1055-02) according to DIN 49073.
- Mains voltage AC 230 V ~
- Mains frequency: 50/60 Hz
- Connected load at 25 °C
- Incandescent lamps: 20 .... 210 W
- HV halogen lamps: 20 … 210 W
- Electronic transformers: 20 … 210 W
- Electronic transformers with LV LED lamp: typically 20 … 60 W
- Inductive transformers: 20 … 210 VA
- Inductive transformers with LV LED lamp: typically 20 … 60 VA
- HV LED lamps dimmable: typically 3 … 60 W
- With setting "LED trailing edge phase control" the max. connected load for HV LED lamps and electronic transformers with LV LED lamps doubles.
You can combine the touch dimmer Standard LED with the following covers: