JUNG HOME Puck switch actuator 1-gang Energy with 2 binary inputs
With the JUNG HOME Puck switch actuator 1-gang Energy, with 2 binary inputs, lighting and common household devices can switched manually and automatically.
The JUNG HOME Puck switch actuator, 1-gang Energy with 2 binary inputs can be installed in a conventional wall box according to DIN 49073 or in false ceilings in an installation box.
- Recording of the energy flow over the previous 24 hours and previous 31 days (charting)
- Operation of the device using the JUNG HOME app, a JUNG HOME push-button, JUNG HOME sensors or with the binary inputs of the JUNG HOME actuator
- Operating hours counter, energy measurement period
- Bluetooth® Mesh for fully encrypted wireless communication and repeater function
- Wireless linking with JUNG HOME system devices
- Integration of the load into areas (groups), central functions and scenes
- Free linking of the 2 binary inputs with JUNG HOME actuators (local or wireless)
- Commissioning and operation using the JUNG HOME app with mobile device (smartphone or tablet) via Bluetooth®
- Power (W) and energy measurement (kWh) of the connected devices
- Power measurement from 0.1 to 3680 watt and energy measurement (kWh)
- Manual and automatic switching of lighting and common household devices
- Master-slave function (switches a wirelessly linked electrical load depending on the electrical load connected)
- Multi-coloured status indicator and Prog button for commissioning
- Run-on time, switch-on delay, switch-off delay
- Power Save function (switches off standby electrical loads)
- Disabling the Prog button
- Disabling function and forced guidance: continuous ON/OFF or for ON/OFF for fixed time
- Trigger the disabling function using binary inputs, e.g. lock-out protection with shutters and blinds, forced guidance, etc.
- Staircase lighting function (automatic switching off) with switch-off warning
- overcurrent protection shutdown
- Independent use of actuator functions and binary inputs
- Can be updated using JUNG HOME app
- Wind alarm via connection of weather sensors to binary inputs
There is a requirement for the following function for at least one of the following devices to be in the project (Bluetooth® Mesh network): JUNG HOME mini actuator, JUNG HOME socket, system insert with JUNG HOME push-button or JUNG HOME motion or presence detector, JUNG HOME room thermostat:
- Activate/deactivate automatic functions using the JUNG HOME app
- Automatic date and time update during connection with mobile device
- Up to 16 time programs
- Time programs with sunrise or sunset (astro timer)