Switch inserts

Relay switch insert, 1-channel

The relay switch insert, 1-channel switches various lamps, for example LED, halogen bulbs or fluorescent lamps. Using the mode selector push-button with LED indicator, you can conveniently configure the run-on times as desired. The switch insert can be installed in a commercially available wall box (e.g. Kaiser 1055-02) according to DIN 49073.

  • 230 V AC ~, 50/60 Hz
  • Adaptive zero-point switching
  • Connection: screw terminals
  • Number of satellite units 2-wire (reference number 1720 NE): unlimited
  • Number of satellite inserts 3-wire (reference number 1723 NE): 5
  • Number of push-buttons: unlimited
  • Covers: .. 17180 .. / .. 17280 .. / .. 17181 .. / .. 17281 .. / .. DWPM 17360 ..
  • Switch-on delay: none
  • Capacitive load: 920 VA (115 μF)
  • Minimum switching current AC: 100 mA
  • Run-on time: none, 1 min., 5 min., 30 min., 60 min.
  • Switching current at 25 °C: 16 A (AC1)
  • Stand-by power: approx. 0.1…0.5 W
  • Test operation to check function

You can find more information here: qr.jung.de/ean/4011377166875

Relay switch insert, 2-channel

The relay switch insert, 2-channel switches different lamps, such as LED, halogen bulbs or fluorescent lamps, as well as configurable ventilation position. Using the mode selector push-button with LED indicator, you can conveniently configure the run-on times as desired. The switch insert can be installed in a commercially available wall box (e.g. Kaiser 1055-02) according to DIN 49073.

  • 230 V AC ~, 50/60 Hz
  • Connection: screw terminals
  • Number of satellite units 2-wire (reference number 1720 NE): unlimited
  • Number of satellite inserts 3-wire (reference number 1723 NE): 10
  • Number of push-buttons: unlimited
  • Covers: .. 17180 .. / .. 17280 .. / .. 17181 .. / .. 17281 .. / .. DWPM 17360 ..
  • Switch-on delay: none, 3 min.
  • In combination with motion detector:
    • Output a2 switches depending on output a1, e.g. to switch on ventilation depending on the lighting, and switch it off with a delay
    • Switch-on delay of output a2 adjustable
    • Run-on time for output a2 adjustable
  • In combination with satellite insert 3-wire:
    • Two independent outputs
  • Capacitive load: 580 VA (70 μF)
  • Minimum switching current AC: 100 mA
  • Run-on time: none, 1 min., 5 min., 30 min., 60 min.
  • Switching current at 25 °C: 10 A (AC1)
  • Stand-by power: approx. 0.1…0.5 W

You can find more information here: qr.jung.de/ean/4011377166882

Electronic switch insert 1-channel

The electronic switch insert, 1-channel is optimised for 230 V LED lamps. This also switches incandescent lamps, high-voltage halogen bulbs, dimmable inductive transformers or Tronic transformers with halogen lamps.

The integrated soft start is particularly gentle on lamps here. The switch insert can be installed in a commercially available wall box (e.g. Kaiser 1055-02) according to DIN 49073.

  • 230 V AC ~, 50/60 Hz
  • Adaptive zero-point switching.
  • Connection: screw terminals
  • Number of satellite units 2-wire (reference number 1720 NE): unlimited
  • Number of satellite inserts 3-wire (reference number 1723 NE): 5
  • Number of push-buttons: unlimited
  • Covers: .. 17180 .. / .. 17280 .. / .. 17181 .. / .. 17281 .. / .. DWPM 17360 ..
  • Operation with neutral conductor:
    • Device is supplied with a line conductor and neutral conductor; no leading edge phase control or trailing edge phase control
  • Operation without neutral conductor:
  • Switching on uses a soft start that is gentle on the lamp
  • Switch-on delay: none
  • Electronic short-circuit protection
  • Electronic overtemperature protection
  • Capacitive load: diverse; see product data sheet
  • Minimum switching current AC: 100 mA
  • Run-on time: none
  • Switching current at 25 °C: diverse; see product data sheet
  • Stand-by power: approx. 0.25 W
  • Test operation to check function

You can find more information here: qr.jung.de/ean/4011377166899