Electronic switch insert, 1-channel
The electronic switch insert, 1-channel is optimised for 230 V LED lamps. This also switches incandescent lamps, high-voltage halogen bulbs, dimmable inductive transformers or Tronic transformers with halogen lamps.
The integrated soft start is particularly gentle on lamps here. The switch insert can be installed in a commercially available wall box (e.g. Kaiser 1055-02) according to DIN 49073. Electric underfloor heating systems or electrothermal drives are controlled in combination with JUNG HOME room thermostat displays.
- Rated voltage: AC 230 V~
- Mains frequency: 50/60 Hz
- Connected load at 25 °C
- Incandescent lamps: 20 ... 400 W
- HV halogen lamps: 20 ... 400 W
- Electronic transformers:: 20 ... 400 W
- Electronic transformers with LV LED lamp: 20 ... 100 W
- Inductive transformers: 20 ... 400 VA
- Inductive transformers with LV LED lamp: 20 ... 100 VA
- HV LED lamps: typically 3 ... 100 W
- When operated with a neutral conductor or when operated without a neutral conductor in the LED trailing edge phase control operating mode
- Connected load for HV LED lamps: typically 3 ... 200 W
- electronic transformers with LV LED lamp typically 20 – 200 W
- When using LED lamps that are not dimmable, the neutral conductor must be connected.
- Number of valve drives: 1 ... 10
You can combine the electronic switch insert, 1-channel with the following covers: