KNX

  1. Mount the supporting frame (1) with two screws (5) in an appliance box.
    The inscription TOP is at the top.
  2. Push the frame (2) onto the supporting frame.
  3. Connect the operating control (3) with the bus terminal to the bus line (4).
  4. Attach the operating control (3) to the frame (2).

Requirement: the device is connected and the bus voltage is switched on.

  1. Press the sensor buttons (^) and (o) simultaneously for approx. 2 seconds.
    PRG MODE appears in the display. The status LED blinks blue quickly.
  2. Allocate the physical address.
  3. Load the application program onto the device.