Installation and electrical connection of KNX automatic switch 2.2 m

  1. Ensure that the mounting location is free of vibration.
  2. For optimum range, select the installation location tangential to the movement direction (you can find a detailed description of the range in the operating instructions for KNX standard automatic switches reference number .. 3281 .. and .. 3281-1 ..).
  3. Avoid sources of interference in the detection range.
  4. Properly connect the bus coupling unit 3 (1).
  5. To ensure a degree of protection of IP 44, additional mounting steps are necessary (see sealing kit instructions).
  6. Fit the cover (3) with frame (2) onto the bus coupling unit 3 (1).
  8. By using additional KNX automatic switches with bus coupling unit mit Busankoppler 3, you can extend the detection range.
  9. The device is programmed with the help of KNX-certified software.
  10. Press the AUTO / I button (5) for approx. 5 seconds until the red LED in the lens (4) lights.
  11. Allocate the physical address using the programming software. The red LED goes out.
  12. Label the device with the physical address.
  13. Load the application program onto the device.
  15. If needed, you can correct the detection sensitivity with the SENS adjuster (6).
  16. The KNX universal automatic switch can additionally be operated by an IR remote control available as an accessory. You can find the exact description in the operating instructions for KNX standard automatic switch reference number .. 3281 .. and .. 3281-1 .. .