Pair device
In order to pair a JUNG HOME device with a mobile device, proceed as follows:
- After completing installation of the JUNG HOME devices, switch on the fuse in the distribution box.
- The JUNG HOME devices remain in pairing mode for 2 minutes. For this time, the status-LED blinks blue and the Bluetooth® symbols in the JUNG HOME room thermostat display and JUNG HOME Gateway blinks.
- You individually activate the pairing mode on the JUNG HOME device (see table or operating instructions). Pairing mode is automatically activated every time power is switched on.
- Follow the instructions in the following video.
JUNG HOME device | How do I put the device into pairing mode? | What happens when the device is in pairing mode? | How long does the device remain in pairing mode? |
|---|---|---|---|
JUNG HOME push-button 1-gang | Press JUNG HOME push-button 1-gang on the full surface for longer than 4 seconds. | The status LED blinks blue slowly. | 2 minutes |
JUNG HOME push-button 2-gang | Press the left button over its entire surface for longer than 4 seconds. | The status LED blinks blue slowly. | 2 minutes |
JUNG HOME motion detector 1.1 m | Turn on the power to the device. | The status LED blinks blue slowly. | 2 minutes |
JUNG HOME motion detector 2.2 m | Press the 0 button for longer than 4 seconds. | The status LED blinks blue slowly. | 2 minutes |
JUNG HOME presence detector | Press the PROG button for longer than 4 seconds. | The status LED blinks blue slowly. | 2 minutes. |
JUNG HOME room thermostat display | Press the MENU button for longer than 4 seconds. | Bluetooth® symbol in the display blinks. | 2 minutes |
JUNG HOME SCHUKO® socket | Press the button with the status LED longer than 4 seconds. | The status LED blinks blue slowly. | 2 minutes |
JUNG HOME SCHUKO® socket Energy | Press the button with the status LED longer than 4 seconds. | The status LED blinks blue slowly. | 2 minutes |
JUNG HOME socket, French/Belgian system | Press the button with the status LED longer than 4 seconds. | The status LED blinks blue slowly. | 2 minutes |
JUNG HOME socket Energy, French/Belgian system | Press the button with the status LED longer than 4 seconds. | The status LED blinks blue slowly. | 2 minutes |
JUNG HOME switch actuator 1-gang mini with 2 binary inputs | Press the PROG button for longer than 4 seconds. | The status LED blinks blue slowly. | 2 minutes |
JUNG HOME blinds actuator 1-gang mini with 2 binary inputs | Press the PROG button for longer than 4 seconds. | The status LED blinks blue slowly. | 2 minutes |
JUNG HOME gateway | Press the U button for longer than 4 seconds. | The status LED blinks blue slowly. | 2 minutes |
JUNG HOME Puck binary input 2-gang, 230 V | Press the PROG button for longer than 4 seconds. | The status LED blinks blue slowly. | 2 minutes |
JUNG HOME Puck binary input 2-gang, battery-powered | Press the PROG button for longer than 4 seconds. | The status LED blinks blue slowly. | 2 minutes |
JUNG HOME Puck dimmer 1-gang with 2 binary inputs | Press the PROG button for longer than 4 seconds. | The status LED blinks blue slowly. | 2 minutes |
JUNG HOME Puck blinds actuator 1-gang with 2 binary inputs | Press the PROG button for longer than 4 seconds. | The status LED blinks blue slowly. | 2 minutes |
JUNG HOME Puck Power DALI-2 controller TW with 2 binary inputs | Press the PROG button for longer than 4 seconds. | The status LED blinks blue slowly. | 2 minutes |
JUNG HOME Puck switch actuator 1-gang Energy with 2 binary inputs | Press the PROG button for longer than 4 seconds. | The status LED blinks blue slowly. | 2 minutes |
JUNG HOME Puck switch actuator 2-gang with 2 binary inputs | Press the PROG button for longer than 4 seconds. | The status LED blinks blue slowly. | 2 minutes |