2-gang touch dimmer Universal LED

You can switch and dim your lighting with the 2-gang touch dimmer Universal LED. As an LED dimmer, you can configure the 2-gang touch dimmer Universal LED specifically as leading edge phase control or trailing edge phase control. The dimmer is implemented as a 2-wire / 3-wire device and is supplied with 230 V mains voltage. Therefore, operation without neutral conductor is also possible.

It has a satellite input for the satellite unit 2/3-wire as well as a push-button.

Using the mode selector push-button with LED indication, you can conveniently configure the dimmer. The 2-gang touch dimmer Universal LED can be installed in a conventional wall box (e.g. Kaiser 1055-02) according to DIN 49073.

  • Mains voltage AC 230 V ~
  • Mains frequency: 50/60 Hz
  • Connected load per output at 25 °C
    • Incandescent lamps: 20 .... 210 W
    • HV halogen lamps: 20 … 210 W
    • Electronic transformers: 20 … 210 W
    • Electronic transformers with LV LED lamp: typically 20 … 50 W
    • Inductive transformers: 20 … 210 VA
    • Inductive transformers with LV LED lamp: typically 20 … 50 VA
    • HV LED lamps dimmable: typically 3 … 50 W
  • With setting "LED trailing edge phase control" the max. connected load for HV LED lamps and electronic transformers with LV LED lamps doubles.

Installation and settings

Configure the operating mode