Touch dimmer Universal LED

You can switch and dim your lighting with the touch dimmer Universal LED. As an LED dimmer, you can configure the touch dimmer Universal LED specifically as leading edge phase control or trailing edge phase control. The touch dimmer is implemented as a 2-wire / 3-wire device and is supplied with 230 V mains voltage. Therefore, operation without neutral conductor is also possible. It has a satellite input for the satellite unit 2-wire/3-wire as well as a push-button.

Using the mode selector push-button with LED indication, configuring the touch dimmer is convenient. The touch dimmer Universal LED can be installed in a commercially available wall box (e.g. Kaiser 1055-02) according to DIN 49073.

  • Mains voltage AC 230 V ~
  • Mains frequency: 50/60 Hz
  • Connected load at 25 °C
    • Incandescent lamps: 20 .... 420 W
    • HV halogen lamps: 20 … 420 W
    • Electronic transformers: 20 … 420 W
    • Electronic transformers with LV LED lamp: typically 20 … 100 W
    • Inductive transformers: 20 … 420 VA
    • Inductive transformers with LV LED lamp: typically 20 … 100 VA
    • HV LED lamps dimmable: typically 3 … 100 W
  • Operating mode LED trailing edge phase control
    • Connected load for HV LED lamps: typically 3 ... 400 W
    • Electronic transformers with LV LED lamp: typically 20 ... 200 W

Installation and settings

Configure the operating mode